{"product_id":"xtool-m2-20w-color-print-and-cut-bundle","title":"xTool M2 20W Color Print and Cut Bundle","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool M2 20W Color Print and Cut Bundle\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAn enclosed desktop laser that also prints in full colour. The M2 pairs a 20W blue diode laser with xTool's CMYK inkjet module, so a design can be printed in colour and then cut or engraved on the same machine without moving the material or realigning anything. This is the Color Print and Cut bundle: the 20W machine plus the inkjet module and its setup parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003ePrint, then cut, in one pass\u003c\/strong\u003e — print a full-colour CMYK design and let the machine cut it out on the same bed, registered to what it printed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e20W blue diode laser\u003c\/strong\u003e across a 426 × 320 mm working area, at up to 600 mm\/s.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCuts to real depth\u003c\/strong\u003e — xTool specifies up to 10 mm basswood and up to 8 mm black acrylic in a single pass with the 20W module.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eTwo cameras\u003c\/strong\u003e — a 5MP panoramic camera for placing designs on the material and a 2MP close-range camera, with autofocus.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eBuilt-in air assist\u003c\/strong\u003e — an adjustable pump is inside the machine, so there is no compressor to buy or plumb in.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eEnclosed and pre-assembled\u003c\/strong\u003e — xTool lists Class 1 laser safety, certified by TÜV SÜD. No build required out of the box.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhat Print-Then-Cut Actually Solves\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePrinting a colour design and cutting it out are normally two machines and a registration problem. You print on one device, carry the sheet to a cutter, and then spend time aligning the cut path to artwork that has shifted by a millimetre or two. On small runs of stickers, labels, cards, badges or decorated keepsakes, that alignment step is most of the work and most of the waste.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe M2 prints and cuts on the same bed, so the cut path and the printed artwork share one coordinate system. For anyone selling personalised goods in small batches, that is the difference between a viable product and a fiddly one.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe 20W module is the reason to take this over the 10W: it roughly doubles what you can cut in a single pass on acrylic, which is where the 10W runs out of headroom.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLaser module\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e20W blue diode\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eProcessing modes\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLaser cutting · laser engraving · CMYK inkjet printing\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLaser working area\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e426 × 320 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eInkjet working area\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e300 × 294 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMaximum speed\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e600 mm\/s\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eOne-pass cut, basswood\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUp to 10 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eOne-pass cut, black acrylic\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUp to 8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLaser spot size\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e0.06 × 0.08 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePositioning precision\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUp to 0.2 mm · wide-angle positioning under 1.5 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRanging precision\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e0.1 mm, probe\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMotion accuracy\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e0.01 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCameras\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e5MP panoramic + 2MP close-range, camera positioning and autofocus\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMachine dimensions\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e610 × 569 × 180 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMachine weight\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e12.3 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMaximum input power\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e200 W\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePower adapter input\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e100–240 V AC, 50\/60 Hz\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSoftware\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool Studio, Windows and macOS\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eConnection\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUSB or Wi-Fi\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFile formats\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSVG · DXF · JPG · JPEG · PNG · BMP\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSafety certification\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eClass 1 laser safety, TÜV SÜD certified (as listed by xTool)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAssembly\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePre-assembled\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCutting depths, speed and precision are xTool's specifications rather than guaranteed results. What you get depends on the material, your settings and the module fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis bundle contains the standalone machine contents plus the inkjet module set.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool M2 machine with the 20W diode laser module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM2 CMYK inkjet module, ink cartridge, bottom cap, bottom cap retainer plate, screw, moisturizing liquid, A5 calibration card, ferrite core\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eModule connection cable, power adapter and cable, USB cable and adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSmoke exhaust pipe, clamp, grease, magnetic fixtures, hex screwdriver, masking tape, M3 × 6 screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMaterial pack, safety instructions, instruction card, user manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the 3W infrared module, rotary accessories, CleanCut panel, WonderPress, screen printer and air purification — all of those are separate products. Projects and props shown in xTool's photography are illustrative.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMaterials\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCutting:\u003c\/strong\u003e wood, opaque acrylic, paper, cardstock, cardboard, MDF, felt, and laser-compatible foam or leather.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eEngraving:\u003c\/strong\u003e wood, opaque acrylic, leather, stainless steel, aluminium, plated metal, paper, MDF, cardboard, felt, rubber, glass, plastic, cork and ceramic. Being on this list does not mean a material can also be \u003cem\u003ecut\u003c\/em\u003e with the diode laser — engraving and cutting are different jobs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003ePrinting:\u003c\/strong\u003e paper, cardstock, sticker paper, wood, canvas, fabric, felt and leather. Smooth or dense surfaces such as metal, glass and ceramic need an ink-receptive coating first.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eNever laser PVC, polycarbonate, or leather and foam of unknown composition.\u003c\/strong\u003e PVC releases chlorine gas that harms you and corrodes the machine. When in doubt, check xTool's material guide rather than experimenting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWorking with the Ink\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe ink is water-based, so finished printed pieces should be kept away from water unless you seal them. The cartridge cannot be refilled — secure the ink cap after use and replace cartridges per the manual. xTool's published page figures for ink yield are inconsistent, so we are not quoting a number; ask us if yield matters to your costing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eExtraction and Ventilation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe M2 has a built-in adjustable air assist pump, and a smoke exhaust pipe is in the box. There is no external air port, and xTool's FAQ states third-party air pumps cannot be connected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFor smoke and odour, the xTool Desktop Air Purifier is the matching extractor — and on the M2 it needs the separate M2 exhaust duct adapter to connect. Both are stocked here. Whatever you use, follow the machine's ventilation instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAccessories and Expansion\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool promotes the RA3 Lite rotary for the M2, and their FAQ notes that RA3 use requires an M2 Adapter Kit. Rotary engraving covers 0–100 mm diameters with a compatible setup. Confirm exactly which rotary and adapter you need before ordering, because the naming across xTool's range is easy to get wrong.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eA 3W infrared module and a 20W diode module are also sold separately for the M2.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhy Buy from Omnimakers\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHeld in the UAE.\u003c\/strong\u003e A 12 kg enclosed machine is expensive and slow to import yourself, and returns on one are worse. Local stock means days, not weeks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003ePriced in AED, all in.\u003c\/strong\u003e No customs surprises at the door, no card conversion fee.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eThe whole M2 ecosystem in one place.\u003c\/strong\u003e Air purifier, M2 duct adapter, rotary and materials — so your setup is complete on day one rather than after three separate orders.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eSupport in your timezone\u003c\/strong\u003e from people who run these machines, for settings and material questions rather than just order status.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhat is the difference between this bundle and the standalone M2?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe standalone is the machine and the 20W laser. This Color Print and Cut bundle adds the CMYK inkjet module, ink cartridge and the inkjet setup parts — which is what makes print-then-cut possible. Without the module the M2 is a laser only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eShould I get the 10W or the 20W?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe 20W cuts roughly twice as deep in a single pass on acrylic — xTool specifies up to 8 mm versus 3 mm — and up to 10 mm versus 8 mm in basswood. Both share the same 426 × 320 mm working area. If you cut acrylic, take the 20W.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDo I need laser safety glasses?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool lists the M2 as Class 1 laser safety with TÜV SÜD certification, which is the classification for an enclosed machine used as intended with its lid closed. Follow xTool's own safety instructions, and never defeat the enclosure interlocks or run it open.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eIs a rotary attachment included?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. Rotary components come with the Deluxe bundle, not this one. xTool promotes the RA3 Lite for the M2 and notes that RA3 use needs an M2 Adapter Kit — check the exact combination before you order.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan I cut metal with it?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. A 20W diode laser engraves metal, including stainless steel, aluminium and plated metal, but it does not cut it. Cutting is for wood, acrylic, paper, card, MDF, felt and suitable foam or leather.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan it print on metal, glass or ceramic?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eOnly with an ink-receptive coating applied first. The inkjet module prints directly onto paper, cardstock, sticker paper, wood, canvas, fabric, felt and leather.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eIs the printed colour waterproof?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. The ink is water-based. Keep finished pieces away from water, or seal them if the item will be handled or used outdoors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan I refill the ink cartridge?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo, xTool states the ink cannot be refilled. Replace the cartridge per the user manual and keep the ink cap secured between sessions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDo I need a separate air compressor?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. The air assist pump is built in and adjustable. There is no external air port, and xTool's FAQ says third-party pumps cannot be connected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDo I need a fume extractor?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eA smoke exhaust pipe is included, and you should follow the machine's ventilation guidance. If you cannot vent to a window, the xTool Desktop Air Purifier is the matching unit — on an M2 it also needs the separate M2 exhaust duct adapter, which we stock.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhat software does it use, and will it run on my computer?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool Studio, on Windows or macOS, connecting over USB or Wi-Fi. It opens SVG, DXF, JPG, JPEG, PNG and BMP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow much assembly is involved?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNone. The machine ships pre-assembled; you fit the laser module and the inkjet module and run the calibration card.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow much desk space do I need?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe machine is 610 × 569 × 180 mm and weighs 12.3 kg. Allow clearance to open the lid and to route the exhaust pipe without a sharp bend.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhat plug does it ship with?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis listing is the UK-plug version. The power adapter accepts 100–240 V at 50\/60 Hz, which covers UAE mains.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan I use it for a small business?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThat is what print-then-cut is for — short runs of stickers, labels, badges, cards and personalised gifts where registration between print and cut would otherwise eat your margin. Cutting depths and speeds are xTool's specifications, so test your own materials before quoting volume work.\u003c\/span\u003e\u003c\/p\u003e","brand":"xTool","offers":[{"title":"M2 \/ 20 Watt Color Print and Cut Bundle \/ UK","offer_id":59681099678041,"sku":"XT-LM-M2-CPC-DIOD-20W-UK","price":5489.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/mk-m2_us_pc_20wcaisetaozhuang_4582-219_1de86b31-eccc-4917-bd5e-f664819ee9c3.webp?v=1791739523","url":"https:\/\/omnimakers.myshopify.com\/products\/xtool-m2-20w-color-print-and-cut-bundle","provider":"Omnimakers","version":"1.0","type":"link"}