{"product_id":"xtool-desktop-air-purifier-f2-f1-m1-ultra","title":"xTool Desktop Air Purifier for F2\/F1\/M1 Ultra","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool Desktop Air Purifier for F2, F1 and M1 Ultra\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eA desktop fume extractor for xTool F2, F1 and M1 Ultra laser work. Smoke and odour leave the machine, pass through a pre-filter, an H13 True HEPA element and activated carbon, and come out as filtered air instead of a haze across your desk. Three fan speeds, replaceable filters, and an exhaust pipe in the box if you would rather vent outside.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — a pre-filter catches visible particles at 5 micrometres and above, a double-layer H13 True HEPA element handles the fine fraction, and activated carbon absorbs gases and odour.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e99.97% down to 0.3 micrometres\u003c\/strong\u003e, as reported by xTool under its own test conditions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eThree fan speeds\u003c\/strong\u003e — xTool suggests minimum or middle for infrared laser work and maximum for diode laser work.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eAutomatic start with the xTool F1\u003c\/strong\u003e — connected by cable, the purifier runs when the laser runs and keeps going for ten seconds after it stops. Working time is configurable in xTool Creative Space. This behaviour is documented for the F1 specifically.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eNo more than 55 dB\u003c\/strong\u003e, per xTool's specification. Quiet enough to sit next to.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eReplaceable filters\u003c\/strong\u003e — two spare pre-filters are included, and full filter packs are available separately.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eVent outside if you prefer\u003c\/strong\u003e — an exhaust pipe and adapter are in the box for routing extraction out of the room.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhy Extraction Matters on a Desktop Laser\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCutting and engraving burns material. Wood, acrylic, leather and coated metals all give off smoke, fine particles and odour, and on an open desk that goes straight into the room you are sitting in. Beyond comfort, the residue settles on your optics: a lens coated in smoke loses power and starts producing inconsistent engraves, which is usually blamed on the machine long before anyone cleans the lens.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eA purifier solves three problems at once — the air you breathe, the smell that lingers in a home or office, and the film that builds up on the laser's own optics and work area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eOne thing it does not do is make every material safe to cut. Some materials, PVC and vinyl in particular, release gases that should never be put through a laser at all, filtration or not. Check the material before the job, not the filter.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCompatible machines\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool F2, F1, M1 Ultra\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDimensions\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e285 × 190 × 296 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eProduct weight\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e4.6 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFilter stages\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePre-filter · H13 True HEPA, double layer · activated carbon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePre-filter capture\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eVisible particles 5 micrometres and above\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHEPA filtration\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e99.97% of particles down to 0.3 micrometres (xTool test claim)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFan speeds\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3 levels\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNoise\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo more than 55 dB (xTool specification)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePower input\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e24 V \/ 2.5 A DC, via the supplied power adapter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eConnections\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eType-C \/ Mini USB\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBrand\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePerformance figures are xTool's, measured under their optimised conditions. Real results vary with the material, the job and the room.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDesktop smoke purifier\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFilter pack (installed)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2 × spare pre-filters\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eExhaust pipe\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePipe adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePower adapter and power cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUSB cable (Type-C)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUser manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe laser machine shown in the product photography is not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSetting It Up\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFit the pipe adapter to your machine's exhaust outlet and connect the exhaust pipe to the purifier.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eConnect the power adapter, and the USB cable if you are running an F1 and want the automatic start.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePick a fan speed — lower for infrared work, maximum for diode work.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIf smoke or smell still bothers you, use the included pipe to route the purifier's output to a window instead of back into the room.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFilter Maintenance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe pre-filter is the part that loads up first and is designed to be swapped. xTool's guidance is to replace the whole filter pack once you have been through three pre-filters. Two spares come in the box, so a replacement pack is the consumable to keep on the shelf. How fast you get through them depends entirely on what you cut — plywood and MDF load a filter far faster than anodised aluminium.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCompatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis purifier is the F2 \/ F1 \/ M1 Ultra version. It is \u003cstrong\u003enot\u003c\/strong\u003e the right unit for the xTool P2, P2S, F1 Ultra, S1, M1 or D Series — those machines take a different purifier.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFor the xTool M2, this purifier needs the separate M2 exhaust duct adapter, which is sold on its own.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe automatic start-and-stop synchronisation is documented by xTool for the F1. On the F2 and M1 Ultra, run the purifier manually alongside the machine unless xTool's documentation for your model says otherwise.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhy Buy from Omnimakers\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHeld in the UAE.\u003c\/strong\u003e Local stock rather than an overseas marketplace order, so it arrives in days instead of weeks — and a 4.6 kg appliance is an expensive thing to ship in yourself.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003ePriced in AED, all in.\u003c\/strong\u003e No customs surprises, no card conversion fee, no import charge at the door.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWe sell the machines it bolts onto.\u003c\/strong\u003e Omnimakers stocks the xTool F2, F2 Ultra and the F-series accessories, so fitment and hose questions get a straight answer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eFilters when you need them.\u003c\/strong\u003e Replacement packs are a consumable, and buying locally means not waiting three weeks for one.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eSupport in your timezone\u003c\/strong\u003e from people who run these lasers.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhich xTool machines does this fit?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe F2, F1 and M1 Ultra. It is not the correct purifier for the P2, P2S, F1 Ultra, S1, M1 or D Series — those use a different model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan I use it with the xTool M2?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eYes, but you need the separate M2 exhaust duct adapter. It is not included here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWill it start and stop with my laser automatically?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eOn the F1, yes — connect the cable and it runs with the laser and stops ten seconds after. xTool documents that behaviour for the F1 specifically, so on the F2 and M1 Ultra plan on switching it on yourself.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eIs the laser machine included?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. This is the purifier, its filters, pipe, adapter and power supply. Machines in the photographs are shown to illustrate use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow loud is it?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool specifies no more than 55 dB. That is conversation-level — noticeable but not intrusive. The figure is xTool's, measured under their conditions, and the fan is louder at maximum speed than at minimum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDoes it remove the smell completely?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe activated carbon stage is there to absorb odour and it makes a large difference, but no desktop filter removes all of it from every material. If you are sensitive, or cutting something strong like MDF or leather, use the included pipe to vent the output to a window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDoes using a purifier mean I can cut any material?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo, and this matters. Some materials should never go in a laser regardless of filtration — PVC and vinyl release chlorine gas that harms you and corrodes the machine. Filtration manages the by-products of materials that are safe to cut; it does not make unsafe ones safe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow often do filters need replacing, and what do they cost?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe pre-filter loads first and two spares are in the box. xTool advises replacing the full filter pack after three pre-filters have been used. Replacement packs are bought separately. Frequency depends on material — plywood and MDF load filters much faster than metals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow do I change the filter?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePress the release button, lift the lid, take out the used filtration kit, drop the new one in and press the lid down. No tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhich fan speed should I use?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003exTool suggests minimum or middle for infrared laser work and maximum for diode laser work, where there is more smoke to move.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDo I still need to open a window?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eGood practice, yes, especially for long jobs or strong-smelling materials. A purifier reduces what reaches the room; it is not a substitute for ventilation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhat power supply does it use?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIt runs on 24 V \/ 2.5 A DC from the included power adapter. That is the device input, not a mains specification — confirm the plug type you need when you order.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow big is it, and where does it sit?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e285 × 190 × 296 mm and 4.6 kg, so it sits on the desk or the floor beside the machine. Allow room for the exhaust pipe to run without a sharp kink.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan it filter for two machines at once?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIt is designed for one machine at a time. Running one pipe from two lasers splits the airflow and extraction suffers on both.\u003c\/span\u003e\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Air Purifier \/ Standard \/ F2\/F1\/M1 Ultra","offer_id":59681061142873,"sku":"XT-AC-AIP-S-F2F1M1U","price":1300.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/e7036be7fc384ce75297fff6b822fb13.webp?v=1791738219","url":"https:\/\/omnimakers.myshopify.com\/products\/xtool-desktop-air-purifier-f2-f1-m1-ultra","provider":"Omnimakers","version":"1.0","type":"link"}