{"product_id":"cooling-fans-for-bambu-lab-3d-printer-hotends","title":"Bambu Lab Hotend Cooling Fan for A, P \u0026 X Series","description":"\u003ch2\u003eBambu Lab Hotend Cooling Fan for A, P and X Series\u003c\/h2\u003e\n\u003cp\u003eThe hotend cooling fan is the small fan on the front of the toolhead that keeps the hotend heatsink cool. It stops heat creeping up into the filament path, which causes clogs, under-extrusion and failed prints. Choose the version that matches your printer: A1\/A1 mini, A2L, P1P\/P1S, P2S, X1 Carbon, X1E or X2D. This is a genuine Bambu Lab replacement part, sold by Omnimakers in the UAE.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents heat creep and clogs:\u003c\/strong\u003e keeps the cold side of the hotend cool so filament melts only in the nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Bambu Lab part:\u003c\/strong\u003e same fan the printer ships with, so it fits the toolhead and connector with no modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStall protection (P1P\/P1S version):\u003c\/strong\u003e the fan stops automatically if it is blocked for 1–3 seconds and restarts within 2–6 seconds. It can stay blocked for up to 72 hours without damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong service life:\u003c\/strong\u003e about 50,000 hours at 40 °C (P1P\/P1S version).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick to replace:\u003c\/strong\u003e a few screws and one connector. No soldering needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Replace the Hotend Cooling Fan\u003c\/h3\u003e\n\u003cp\u003eReplace the fan if it has become loud, rattles or runs slowly. You should also replace it if the printer shows a hotend cooling fan error, or if you see clogs and under-extrusion that start partway through long prints. A failing hotend fan is one of the most common causes of heat creep on Bambu Lab printers. Keeping a spare avoids downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version Do I Need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour printer\u003c\/th\u003e\n\u003cth\u003eVersion to choose\u003c\/th\u003e\n\u003cth\u003eBambu Lab part no.\u003c\/th\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA1, A1 mini\u003c\/td\u003e\n\u003ctd\u003eA1 Series\u003c\/td\u003e\n\u003ctd\u003eFAF007\u003c\/td\u003e\n\u003ctd\u003e6975337034025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA2L\u003c\/td\u003e\n\u003ctd\u003eA2L\u003c\/td\u003e\n\u003ctd\u003eFAF027\u003c\/td\u003e\n\u003ctd\u003e6937285513151\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eP1P, P1S\u003c\/td\u003e\n\u003ctd\u003eP1 Series\u003c\/td\u003e\n\u003ctd\u003eFAF002-P\u003c\/td\u003e\n\u003ctd\u003e6975337031819\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eP2S\u003c\/td\u003e\n\u003ctd\u003eP2S\u003c\/td\u003e\n\u003ctd\u003eFAF021\u003c\/td\u003e\n\u003ctd\u003e6937285507129\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX1 Carbon\u003c\/td\u003e\n\u003ctd\u003eX1 Carbon\u003c\/td\u003e\n\u003ctd\u003eFAF002\u003c\/td\u003e\n\u003ctd\u003e6975337030713\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX1E\u003c\/td\u003e\n\u003ctd\u003eX1E\u003c\/td\u003e\n\u003ctd\u003eFAF011-V2\u003c\/td\u003e\n\u003ctd\u003e6937285509987\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX2D\u003c\/td\u003e\n\u003ctd\u003eX2D\u003c\/td\u003e\n\u003ctd\u003eFAF023\u003c\/td\u003e\n\u003ctd\u003e6937285509413\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe fans are not interchangeable between printer families. For H2D, H2S or H2C printers, contact us and we will confirm the correct part.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications (P1P\/P1S version, FAF002-P)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated voltage\u003c\/td\u003e\n\u003ctd\u003e5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating voltage range\u003c\/td\u003e\n\u003ctd\u003e3–6 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated speed\u003c\/td\u003e\n\u003ctd\u003e15,500 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e5.03 m³\/h (2.96 CFM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService life\u003c\/td\u003e\n\u003ctd\u003eAbout 50,000 hours at 40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStall protection\u003c\/td\u003e\n\u003ctd\u003eStops after 1–3 s blocked, restarts within 2–6 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1 Series version:\u003c\/strong\u003e Bambu Lab A1 and A1 mini\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA2L version:\u003c\/strong\u003e Bambu Lab A2L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP1 Series version:\u003c\/strong\u003e Bambu Lab P1P and P1S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP2S version:\u003c\/strong\u003e Bambu Lab P2S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX1 Carbon version:\u003c\/strong\u003e Bambu Lab X1 Carbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX1E version:\u003c\/strong\u003e Bambu Lab X1E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX2D version:\u003c\/strong\u003e Bambu Lab X2D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStep-by-step replacement guides for each printer are on the \u003ca href=\"https:\/\/wiki.bambulab.com\" target=\"_blank\" rel=\"noopener\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Bambu Lab hotend cooling fan for the version you choose\u003c\/li\u003e\n\u003cli\u003eP1P\/P1S version: 2 × MG2.5-15 mounting screws\u003c\/li\u003e\n\u003cli\u003eP2S version: 1 × air channel and 3 × BT2×5 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Buy from Omnimakers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Bambu Lab spare parts from a UAE-based store\u003c\/li\u003e\n\u003cli\u003eLocal help choosing and fitting the right part for your printer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat does the hotend cooling fan do on a Bambu Lab printer?\u003c\/h4\u003e\n\u003cp\u003eIt cools the hotend heatsink so heat stays in the nozzle and does not travel up into the filament path. If it fails, filament softens too early and jams, which is called heat creep.\u003c\/p\u003e\n\u003ch4\u003eIs the hotend cooling fan the same as the part cooling fan?\u003c\/h4\u003e\n\u003cp\u003eNo. The hotend fan cools the hotend and runs whenever the nozzle is hot. The part cooling fan blows air onto the printed layers to solidify them. They are different parts.\u003c\/p\u003e\n\u003ch4\u003eWill the P1S hotend fan fit my P2S, X1 Carbon or A1?\u003c\/h4\u003e\n\u003cp\u003eNo. Each printer uses its own fan. Choose the version named after your printer: A1 Series for A1 and A1 mini, P1 Series for P1P and P1S, and the matching version for A2L, P2S, X1 Carbon, X1E or X2D.\u003c\/p\u003e\n\u003ch4\u003eHow do I know my hotend fan needs replacing?\u003c\/h4\u003e\n\u003cp\u003eCommon signs are unusual noise, a fan error on the printer screen, a fan that spins slowly or not at all, and repeated clogs during long prints.\u003c\/p\u003e\n\u003ch4\u003eDo you deliver across the UAE?\u003c\/h4\u003e\n\u003cp\u003eYes. Delivery options and times are shown at checkout.\u003c\/p\u003e\n","brand":"Bambu Lab","offers":[{"title":"Hotend Cooling Fan \/ P1 Series","offer_id":58078155440473,"sku":"BL-SP-HCF-10PS-A1X1P1","price":65.0,"currency_code":"AED","in_stock":false},{"title":"Hotend Cooling Fan \/ A1 Series","offer_id":58078155473241,"sku":"BL-SP-HCF-10AS-A1X1P1","price":65.0,"currency_code":"AED","in_stock":true},{"title":"Hotend Cooling Fan \/ A2L","offer_id":59533193052505,"sku":"BL-SP-HCF-A2L-A2L","price":65.0,"currency_code":"AED","in_stock":false},{"title":"Hotend Cooling Fan \/ P2S","offer_id":59533193085273,"sku":"BL-SP-HCF-P2S-P2S","price":71.0,"currency_code":"AED","in_stock":false},{"title":"Hotend Cooling Fan \/ X2D","offer_id":59533193150809,"sku":"BL-SP-HCF-X2D-X2D","price":71.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/cooling-fan-for-hotend-x1-series.webp?v=1779010979","url":"https:\/\/omnimakers.myshopify.com\/products\/cooling-fans-for-bambu-lab-3d-printer-hotends","provider":"Omnimakers","version":"1.0","type":"link"}